The pipe clamp structure consists of a handle and a movable jaw, wherein the top surface of the handle is fixed with a curved jaw block, and the movable jaw system is arranged at the top of the handle, and the spring is used to make the movable jaw snap automatically relative to the curved jaw block of the handle, so that most of the force is perpendicular to the circular surface of the above-mentioned bite point, and greater friction is generated at the bite point. When the curved jaw is occluded with the clamp, it will not slide due to the deformation of the pipe fitting. So how to operate the booster pipe clamp safely? The following Xiaobian take you to understand.
1, according to the size of the pipe to choose the appropriate specifications of pipe pliers, the operation should be lunged firmly, properly low the important position, the direction of the two palms, the position of the appropriate staggered, grasp firmly, do not use too strong force to avoid the pipe pliers slip caused by slip, fall injury.
2. When using the afterforce pipe clamp, one hand should hold the head of the pipe clamp, and the other hand should press the handle of the pipe clamp. After several adjustments, confirm that the afterforce pipe clamp firmly bites the pipe, and then forcibly unbuckle. It is forbidden to use a booster bar or more than one person to pull the pipe clamp at the same time, so as not to cause the pipe clamp to break and injure the operator.
3, the use of afterforce pipe clamp, should first check whether the fixed pin is firm, clamp head, clamp handle have cracks, cracks can not be used; The small afterforce pipe clamp should not be used with too much force, and the afterforce pipe clamp should not be used as a hammer or crowbar. In addition, after use, wash promptly, spread butter, prevent the rotary nut rust, put back in the tool rack or tool room.