The application of afterburner pipe clamp has played a great role in the installation of oil pipelines and civil pipelines, but the correct maintenance method must be adopted during and after use. So how do we use the afterwrench and how do we maintain it? Please follow the small series to understand.
When the pipe clamp is operated, because the opening degree of the clamp clamp, that is, the movable clamp head on the pipe clamp has a certain wiggle when it is opened, the size of the opening as long as the diameter of the pipe is the same, if the opening is greater than the diameter of the pipe, it is difficult to clamp on the pipe. When twisting the afterforce pipe clamp, it is important to pay attention to a very important principle, that is, the pipe clamp can only be applied in a clockwise direction. Because you look carefully at the shape of the teeth on the pipe clamp you can find that it is in one direction, if you need to operate the direction of force and need to tighten or loosen the pipe is not correct, take the pipe clamp off the pipe fitting "turn the direction", that is, the pipe clamp change the direction of twisting, you can operate. Before using the afterforce pipe clamp, ensure that the clamp is firmly stuck on the pipe being clamped. If there is a gap, it is easy to slip when we turn the handle of the pipe wrench hard, which may hurt ourselves or others.
The maintenance method of the afterforce pipe clamp: If the surface of the afterforce pipe clamp has serious stains or scratches, fireworks burns, you can use fine sandpaper to gently grind the surface, and then wipe with a cleaning cloth. However, do not use sharp, hard items to scrape the surface of the pipe clamp hardware accessories, but also to avoid contact with substances such as hydrochloric acid, salt, salt brine. If there is a stain on the surface of the pipe clamp, remember to wipe with a damp cloth or wet cloth dipped in neutral detergent or cleaning agent, and then wipe the water stain. Water stains on the surface of the pipe clamp caused by careless use should be wiped dry after use, and the surface should be kept clean and dry frequently. The metal guide rail, hinges, hinges, etc. of the pipe clamp should be regularly lubricated to maintain bright lubrication.